Posted by Gustronico on January 18, 2004 at 20:55:17:
In Reply to: Re: A-60 missing resistors posted by Sten on January 17, 2004 at 02:15:28:
Thank you Sten for the info.
It will be very usefull
Gus
: The original value is 0.33 ohms/5W but according to Service Bulletin AN-107 it should be changed to 1 ohm/5W. The Power Transistors shall also be upgraded 1 step. You can find Both Service Manual and Bulletin at this sites Home Page www.sansui.us and click on the red link.
: : Hi everybody
: : Repairing a Sansui A-60 amp. I noticed that output emitters double-resistors are missing. Something like .22 or .33 ohm, you know.
: : Can anyone tell me the correct value?
: : Thank you all
: : Gustronico