Posted by Mariano on March 23, 2005 at 18:32:17:
In Reply to: Re: Info needed on Sansui A80 and AU2200 amps. posted by Peri Prasad on July 21, 2004 at 04:33:27:
: : Hi all,
I'm mariano from Argentina and i speak English like a log, but i think that i can help you with some specifications of the A-80. Also, i have the schematics zipped, just send me an e-mail and i send you what you want.
best regards!
mariano.
Sansui A-80
power output
min.RMS, both channels drivern, from 20Hz. to 20Khz., no more tham 0.05% THD : 65W per channel
Load Impedance
8 ohms.
THD
less than 0.05% rated min. RMS power output
Frecuency response
at 1W : 5 to 70.000Hz. +0.5dB, -2dB
RIAA curve deviation
(Phono, 30hz. to 15KHz.): +0.6dB, -0.6dB
Input sensitivity and impedance
Phono-MM 2.5mV/47Kohms
(max imput capability;180mV at 1KHz, less than 0.1%THD)
Phono-MC 0.1mV/10 ohms
Aux-Tuner-tape play 150mV/47Kohms
Output level and impedance (1Khz)
Tape rec 150mV/47Kohms
Hum and Noise (short circuit, A-network)
Phono-MM 80dB
Phono-MC 60dB
Aux-tuner-Tape play 95dB